Totally, eight components have to be fixed in the circuit.įix the chip on either side of the circuit. Two chip, four resistors, two capacitors. This room has circuit structure in all the four portions and you will have to make all the circuits glow.Ĭlick on the floor and find out the components which do not fall in the right place. Take the third key from the third row or the third column.Ĭome back and take the key from the inventory panel. Use the tool to break the glass cover of the key rack. There is a key rack on the right side portion of the wall.Ĭlick on the key rack and take the tool from the inventory panel. Now, you can move out from the room easily through the gap.Ĭlick at the gap and move out from the room. Similarly, drag the big-sized box, found on the right side and release it underneath the shutter.ĭrag the small-sized box, found on the right side and place it above the bigger one. ![]() You need to stop the shutter’s movement by placing the boxes underneath the shutter in such a way that it doesn’t close completely.ĭrag the big-sized box, found on the left side and release it underneath the shutter.ĭrag the small-sized box, found on the left side and place it above the bigger one. The rectangle shaped button glows, and now pull down the last lever switch to lift the shutter.Ĭome back and now the shutter starts to move up and down. Press the circle shaped red buttons one by one to make the buttons glow, and then pull down the first and the second lever switches, starting from left to right. ![]() ![]() Go to the left side and click on the switch board.
0 Comments
Leave a Reply. |